Home improvement & design: How to install wood wainscoting & vertical trim

2016 MyFixitUpLife Wood Naturally wainscoting installation - Mark

Wood wainscoting is one of my favorite interior finishes. It’s fun, clean, and all carpentry. And it looks sensational. In this video I run through a few steps for getting a job that’ll last—and that you’ll love.

Things I focus on primarily for wood wainscoting—especially vertical installations—are getting the first pieces plumb (straight up and down), detailing the corners so it looks like a piece literally wraps around from one wall to another and of course, cut-outs for electrical devices. There’s even a pop-up tool review. It’s all in the video.

A finish nailer makes fast work of installing this material.

wood wainscoting
My go-to nailer for installing wood wainscoting is my Hitachi angled finish nailer.

Getting the first piece plumb—straight up and down—is key for a neat job. It’s easy too. I used my DeWalt green laser of awesomeness. Also, I kept it on to check boards every half-dozen or so to make sure everything remains plumb.

Also, it’s hard to see but I’m using one of my favorite all-around tools—see it there above the nose of the nailer?—my Hyde bent metal pry bar. In this case I’m using it to help wedge the corner pieces just so. I love that thing.

wood wainscoting
Get starter pieces plumb, wrap corners, and check for plumb ever 6 boards or so.

I stage pieces facing the correct way before installing them. This minimized potential for mistakes and having to flip boards around all the time. This wood wainscoting has a flat face and a beaded face.

wood wainscoting
Stage pieces before installing them.

Fasten through the tongues of the boards. This will hide the nail head best (but not entirely) and drive the pieces together. You’ll still have to fill the nail hole before painting. Easy.

wood wainscoting
Toe nail through the tongue of the board to drive it tight to its mate.

Because—pretty. This T&G material is factory-primed and takes paint wonderfully. It can also be purchased as raw wood with or without knots and can be left clear. Lots of design options with wood.

wood wainscoting
Two faces, one piece. Using real wood enables you to get a beaded look or a crisp V-joint and lets you customize the work to the space. The client on this job loved it.

For electrical device penetrations, I used a jigsaw to carefully cut out for the box. This cordless Bosch is nice.

wood wainscoting
Cutting out for electrical devices.

A miter saw with what we carpentry dweebs call in-feed and out-feed support—aka a Red Bull table…it’s got wiiiings—makes cutting wainscoting—and everything else—about a million times easier.

wood wainscoting
I tricked out a rolling workbench as a cut table. It’s on wheels so I could move it around the room as needed.
wood wainscoting
Fully tricked out. I love the look.

 

 

Related Posts

Comments (3)

Hi, i read your blog from time to time and i own a similar one and i was just wondering if you get a lot of spam comments? If so how do you reduce it, any plugin or anything you can advise? I get so much lately it’s driving me crazy so any assistance is very much appreciated.

I couldn’t resist commenting

I like this post, enjoyed this one thanks for putting up.

Leave a comment

Verified by MonsterInsights