Holiday DIY Projects: Making MyFixitUpLife’s wicked awesome wine rack

Let’s celebrate the short days of the yuletide season with a little light and do some holiday DIY projects for people we love.

As part of Bernzomatic’s Torchbearer brigade of artists, chefs, campers and cooks, Theresa and I were invited to their place to make a project live. We took photos as we went and talked to people. It was a blast.

So here’s how we took some 1/2-inch copper pipe, a torch, some basic tools and made our wicked awesome wine rack.

‣ MyFixitUpLife holiday DIY projects
Doing holiday DIY projects together makes us happy. Also, wine.

We cut all our pipe first. Copper is soft enough to cut with a miter saw. Tip: Ease the saw into the work, don’t ‘chop’ too fast. The pipe can deform and not mate up with a fitting. And, wear safety glasses. Yes, it’s soft, but copper is still metal. Everything here is 1/2-inch material. For this three-bottle wine rack we used 10-feet of 1/2-inch copper pipe, 6 tees, ten 90-degree elbows, 6 caps, and 4-pipe straps.

‣ MyFixitUpLife diy holiday projects
Copper is a soft metal and can be cut on a miter saw. Wear safety glasses.

Even though this is a wine rack, we still soldered like it was a plumbing fitting. And I love it every time the solder draws into a fitting! So cool!

To get the best joints possible, sand or wire brush the fitting and pipe on the surfaces that’ll touch, then apply flux with a brush.

‣ MyFixitUpLife DIY holiday projects
We sanded and fluxed all our tees and 90s before applying heat.

As usual, no one is watching. Even Theresa is stepping out of the way. However, Theresa and I find holiday DIY projects fun to do together. She applied the heat and I worked the solder. Also, using a cinder block is great for torch projects. That’s the main reason for the photo. And that I’m possibly crazy.

‣ MyFixitUpLife holiday DIY projects
This is a slightly stylized way of soldering.

The wicked awesome wine rack coming together. Theresa rocked MAP/Pro gas and Bernzomatic’s BZ8250HT torch, which we love for table top DIY like this.

‣ MyFixitUpLife holiday diy projects
We really do love making holiday DIY projects. Welcome to the wicked awesome wine rack.

Not only did we chamfer the edges of the 2×6 backer board with a low-angle block plane, Theresa brought out the grain with flame. It only took a few minutes to add instant awesome.

‣ MyFixitUpLife holiday DIY projects
Add immediate patina and texture by burning the wood backer.

One last thing: The pipe-ends are turned up so the wine bottle rests slightly tipped. The reason for that is so the cork stays wet during storage.

I’m not sure if any of us store wine that long, but if you do, you’re good to go. Coincidentally, this is also a perfect storage rack for bottle of Bernzomatic gas bottles.

‣ MyFixitUpLife holiday DIY projects
The ends of the wine rack are turned up so the bottlesis slightly tipped, keeping the cork wet.

Open up the workshop and make stuff for people you love!

 

author avatar
Mark
A licensed contractor, tool expert, wood and outdoor enthusiast, and elite Spartan Race competitor, he writes about home improvement and tools for national magazines and websites, and teaches hands-on clinics for other remodeling professionals. Check out his book, The Carpenter's Notebook.

Leave a comment

Verified by MonsterInsights