Categories: Fence

How To Build a Eye-Catching Wood Driveway Gate

Building a gate across a driveway is a DIY-able project. There are, however, some pretty important milestones we need to hit or the gate can sag, be out of level with the opposite panel, and/or the hardware won’t operate correctly. But with some careful planning, double-checks, and the tips in this video it is not impossible to zap together a cool wood driveway gate system. Here are some of the things I did on this driveway gate project to make it spring to life. 

Here is the driveway gate how to

  1. Dig gate holes at least 36 inches deep. Deeper is better. Gravity never takes a day off. Call 811 before digging.
  2. Pre-paint gate hardware, if desired, at least 4-passes
  3. Apply Post Protector sleeve to gate posts.
  4. Set post in hole “wild” (we’ll cut it later). Make sure the hole isn’t so deep that the post is actually too short
  5. Place one bag Fast Set concrete around the base of the post.
  6. Do this for both posts. The concrete acts as a mooring.
  7. Backfill holes. Concrete still cures under the dirt.
  8. Tamp in ~~1-foot lifts. Use the blunt end of a digging bar and just squash the air our of the soil. It’s hard work, but it’s worth it. Don’t tamp too hard (“too hard” is anything much more than letting the weight of the digging bar itself fall from 8-10 inches above the dirt) or you’ll definitely move the post where you don’t want it to go.
  9. “Dry fit” gate hardware against the posts and lay out gate sizing based on the hardware projection from the posts–not post-to-post, but hardware-to-hardware.
  10. Assemble gate panels. I like a “stepped” joint for this way better than a miter.
  11. Install diagonal, tracing from bottom, so the low end drives towards the bottom hinge.
  12. Hang panels.
  13. Install gate hardware.
  14. Install screening if needed. I like washer head screws for this.

And there you have it. Is this next-level driveway action? Yeah. If you need to keep kids or pets separate from the street, building a gate across your driveway is all-day-DIY.


About the Author

Mark
Mark is a licensed contractor, tool expert, wood and outdoor enthusiast, and elite Spartan Race competitor. He writes about home improvement and tools for national magazines and websites, and teaches hands-on clinics for other remodeling professionals. Check out his book, The Carpenter's Notebook.
Mark

Mark is a licensed contractor, tool expert, wood and outdoor enthusiast, and elite Spartan Race competitor. He writes about home improvement and tools for national magazines and websites, and teaches hands-on clinics for other remodeling professionals. Check out his book, The Carpenter's Notebook.

Share
Published by
Mark

Recent Posts

QuickTip: How to Uncoil Cords and Hoses Like a Pro

Tangled up hoses can be frustrating and time sucks. So here's how to quickly uncoil…

3 days ago

Extreme Makeover really builds a house in 7 days?

Here's what really happens at an Extreme Makeover Home Edition project from my view as…

4 days ago

Tool Review: Best Table Saw is the Skil Table Saw

Need the best table saw for a mobile jobsite or DIYer? Look no further. Here's…

7 days ago

Kitchen Materials and Appliances Guide

Selecting the right kitchen materials and appliances is essential so that your kitchen performs well…

2 weeks ago

Kitchen Ideas and Inspo Guide

Envisioning your goals for your kitchen remodel is a priority before you even consider getting…

2 weeks ago

Kitchen Remodeling Guide: What You Need To Know

We want you to be ready to take on your kitchen remodeling project confidently. Check…

2 weeks ago