Here at the MyFixitUpLife HQ we do a lof of painting both inside and outside the house. And doing a good job painting is as important to a project as tight miter joints or hanging cabinents dead level. While there’s no doubt painting is work, knowing some tricks can save you time and thousands of dollars.
Related Posts
Tips and tricks for working with plaster walls – from pulling it down to patching it up. MyFixitUpLife Mark & Theresa created this honest and…
MyFixitUpLife show w/ Mark and Theresa broadcast live from the Grace-Bondera booth at the 19th annual Remodeling Show in Baltimore. Mark and Theresa had the…

Upgrade stripped-down utility trailers to move mulch and tow tools. If you have a 16-inch-tall angle-iron trailer body, you’re limited. Unless you add to it.

One of my very favorite home improvement projects is building a deck. I’ve built many—along with fences, playgrounds and other sweet outdoor stuff. I love…

If the value of a project is measured in how often you use it, our compost bin is well near the top of the list….

Home improvement comes in all shapes and sizes. Some of the best ones are the ones you make yourself, I think. So grab the September…

I adore crown molding. I like installing it, too. I’m sharing tips that can help get first timers started and idiot proof it for the…

Mark and Theresa write about designing and building a bridge. And about how building on a volunteer project with Rebuilding Together delivers DIY takeaways—and more—for every project….

A post-hole is more than just a hole in the earth. It is a shaft cut straight down into the ground to particular size in…
Skylights are a terrific addition to most living spaces, especially if they open. The natural light they let stream in is better than anything that…

Mark shares how he and Theresa transformed a 100+ year old basement into the perfect basement man cave. Click here to read more by Mark…
Mark and Theresa are broadcasting LIVE! inside the Ironclad technical workwear blast furnace at the National Hardware Show. School is in, Toolskool that is, when…

Get-started crown molding advice for first-timers and idiot-proofing for pros with this advice from Mark on how to cut and install crown molding like a pro.
Garages, woodshops and workshops are perennially starved for space and organization—and mine is one of them. It’s forever jam-packed with tools, materials and work surfaces…
Chad Gillikin, publisher from Extreme How-To magazine, is sharing news from the magazine from inside the Therma-Tru doors / Fypon molding booth at the International…