Upcycle a door into another use? Yes!
We rescued an 100-year-old 5-panel door from demise. With no opening to hang it in, it needed a new purpose in life.
So why not repurpose that bad boy into a bench? And bling it with some color it never had before? No reason, that’s why. So we set out to turn a door into a super cool kid’s bench. It’ll have cool, secret stashes for mom and dad and get kicked up with glad, Glidden colors.
You can do this upcycle project with just a few tools. I’m a professional carpenter, so I think nothing of having a million tools at my disposal. But this one doesn’t require all of them.
I suppose you could do the whole thing with a cordless drill and circular saw, but I got some extra mileage out of the table saw. A straight-edge and a few clamps got some camera time too!
Old paint must go. Far and away, orders of magnitude, and double-wow-factor the fastest and easiest way I have ever removed an old finish is using my Hyde hand scraper. Teamed up with the Hyde bent metal pry-bar and 2-inch putty knife, it was like Terminator: Genisys on the peeling paint. Better than chemicals, power tools and paying a lot of money for dip and strip.
Square up. Old doors are have about a 322% chance of being out of square. I go into it more in this VIDEO but the gist is that old doors get shredded as old houses settle. People cut, sand, and hack them down to fit an opening’s new shape, or for new floors or carpet. I use my saw, clamps and straight-edge to true up the top and bottom. Trust me, you’ll be happy you did this later. I also use a framing square to mark my line, running it from the hinge-side of the door (no one ever planes down the hinge side). Cut the pieces. This bench is 52-inches tall. I cross-cut it at 52-inches first, then cut that piece in half lengthwise (called a ‘rip’). I used clamps, a straight-edge and a circular saw to make the cuts. Join the pieces. So this is where my ‘I’m a professional carpenter’ comes in and might make things sound confusing. You could just screw the door together right now, as is. Because the rails and panels are different thicknesses, however, there will be openings that’ll show. For me, closing them is easy and a table saw helps. The idea is to make a transition block, which I did by ripping a 2×4 on my table saw to 1 1/2-inches by 1 1/2-inches. I then screwed it to one half of the door, then, flipped the assembly over and fastened the other half. Result: L-shape, no gaps. The seat. With the panel I have left from cutting the door to length, I made the seat. Rather than measure and think and conjecture, I put the L-shaped door assembly on top of the panel and looked at it. It took a couple of twist and shouts before I figured out what I thought would work the best. Once I found it, I marked the panel. For me, it was easiest to cut this on the table saw. Once to size, I got it squared up with the L, marked and fastened it from behind. Note: It’s important to fasten through a rail or stile into a rail or stile. Panels aren’t strong enough. I then got inspired and use the other half of the remaining panel as a base. A vertical leg between the two locks everything together. Color!!! Now it’s color time! I painted the panels first Glidden’s Diamond Interior Paint + Primer in semi-gloss: Trattoria Teal. Glidden’s Diamond Interior Paint + Primer in Semi-Gloss Teal Lake––which I think is the stronger color—I used it for the border pieces and the back. The Diamond line of Glidden paints are perfect for what I’d call a high-use item like this. Designed to stand up to repeated washing, scrubbing and stains, it’s pretty much idea for something involving children and shoes! Tip: To make painting the corner bench easier, I propped it up on some blocks on a low bench. Secret deets. Kid stuff is cute, but I have tied enough shoes in my life while clutching my wallet in my mouth or putting my phone on the floor where it wopn’t get trampled to know having a few secret stashes for are little things I’ll use. For that reason, I made a small shelf from left over door parts to hold an tablet or phone or wallet. And from two little pieces of left over molding, I glued them to the door for hooks. Perfect to snag a key ring or umbrella lanyard, I won’t be activating my car alarm because my 7-year old won’t let me put his shoe on while I manage the off-to-school pile of back pack, the single shoe I can find and my coffee cup with my key fob in my mouth because ‘oh, that’s where I left my phone…’ As a nod to the door’s pedigree, I left the hardware as it was. The knob is a perfect place to hang a ball cap! Have you repurposed an old door for another use? We’d love to know about it. This post is sponsored by Glidden Paint, a PPG Brand. All thoughts, opinions, and paintbrushes are my own.More fun details and DIY
Tangled up hoses can be frustrating and time sucks. So here's how to quickly uncoil…
Here's what really happens at an Extreme Makeover Home Edition project from my view as…
Need the best table saw for a mobile jobsite or DIYer? Look no further. Here's…
Selecting the right kitchen materials and appliances is essential so that your kitchen performs well…
Envisioning your goals for your kitchen remodel is a priority before you even consider getting…
We want you to be ready to take on your kitchen remodeling project confidently. Check…