Pallet project inspired! Making the Hanging Gardens of Pallet-On Planter

Bernzomatic pallet project

Pallet + rope + plants = The Hanging Gardens of Pallet-on. The 8th Wonder of DIY!

Bernzomatic pallet project
I filled the planter boxes with soil and compost from our compost bin and planted one of my favorite all time plants—amaranth.

Design. I designed this pallet project to display something I love in a place I love, namely: Flowers and plants and my front porch. It takes up zero floor space. And it’s what I call an ‘open barrier’. I’m not saying my neighbors chew with their mouths open or anything. I’m just saying that IF they did…well…You get it. Here’s how I made the Hanging Gardens of Pallet-on.

Dissect a pallet. For the pallet I had, cutting the end sections and middle section out conveniently created the planter box…almost. I also had to cut planks off the rest of the pallet for backs and bottoms. I used my reciprocating saw to cut the nails.

The hanging part. I hung my pallet project from my porch which means I needed something to connect the ropes to and something to connect the whole thing to the porch. Long story short, I made an L out of two pallet boards and some 2-inch washer-head Spax screws. I used those because I knew threads would cut into the pallet wood well and the flat heads wouldn’t countersink and create splits.

The rope. The big challenge with the rope was to keep it from fraying at the ends and unraveling. I bought 1-inch poly line from a home center and fused the ends with my Bernzomatic torch. It would have taken six years to do this with matches or a lighter.

Next I payed out about 4-feet of line for each vertical, tied a knot in one end and used a 1-inch pipe collar screwed to the L to hold them in place.

Then I spaced each planter box about 1-foot apart along the line and fastened with 2-screws on each side (total: 4-per box). Tip: Drive a scratch awl or nail set through the rope fibers to create a little channel, then pass the screw through and fasten. I used the washer head screws again here, which compressed the rope against the pallet and locked everything together.

Box bottoms. With extra pieces left over from the pallet, I fastened bottoms to the planter boxes. It’s OK if there are gaps. Planter boxes are supposed to leak.

Fill and plant. I filled the planter boxes with soil and compost from our compost bin and planted one of my favorite all time plants—amaranth (quick Thank You to Burpee for telling me what they are). They’ll grow hearty and red and give me color in a place I love to hang out late into the Fall.

This is a sponsored post. I am a Bernzomatic Torch Bearer, though all opinions expressed are my own.
Bernzomatic pallet project
Step one in almost any pallet project: Dissect the pallet, Tools of choice—reciprocating saw for cutting nails, and…
Bernzomatic pallet project
…a circular saw (cordless is even ideal-er) for crosscutting pallet parts.
Bernzomatic pallet project
Make an ‘L’ from pallet boards for the Hanging Garden to hang from.
Bernzomatic pallet project
Cut the cord! A long-bladed OLFA-style knife worked really well on cutting line this thick.
Bernzomatic pallet project
So, fusing the rope’s cut ends is how this project literally hangs together. A pair of locking pliers holds the rope strands together and my Bernzomatic torch applies the heat needed to fuse the ends.

 

Bernzomatic pallet project
The secret sauce for fastening the ropes is to create a little tunnel between the strands with an awl or nail set. Pass the screw threads through it, then start driving the screw.
Bernzomatic pallet project
Two-inch washer head screws like these Spax compress the rope into the pallet unlike a drywall-type screw which would just go through the rope strands.
Bernzomatic pallet project
Hanging tip: I started the washer-head screws before lifting the whole thing into place. It made it easier to hang where I wanted it.This is pretty heavy, so use a good ladder and be safe.
Bernzomatic pallet project
These plants grow hearty and red and give me color in a place I love to hang out late into the Fall.

Related Posts

Comments (5)

[…] the flame. Finally, a use for pallets that’s not a couch or rope swing or planter. Actually, I like our planter. Check it out here. If you want a pallet couch, watch this […]

[…] We’ll be talking wall art, bending metal, solder, ropes, and a whole lot more cool stuff. It’s time to show-and-share why fire and DIY mix. […]

[…] made as slow and shallow a cut as I could. I used my sanding station to clean up the edges. And my Bernzomatic torches did the high heat work of soldering copper ‘feet’ to the bottom of this […]

[…] the reclaimed wood was  purchased as planks and applied to an existing nook to make it look timberframed. If they […]

[…] Spax Multi-Material screws crush the other fasteners’ success rate and ease of use. A 5/32 hole through the plate into the concrete and the Spax bores into both wood and concrete and connects solidly. And I’m not chasing around after a fasteners and a nut driver I rarely use because I’m using the fasteners I already have in my pouch. […]

Leave a comment

Verified by MonsterInsights